Environment Monitoring System Motion Detectors
Motion/Intrusion/Vibration Sensors compatible with ENVIROMUX-MINI-LXO
Motion Detector Sensors
Low-Cost Infrared Motion Sensor – CE Compliant
- Registers movement in area covered: 39x39 ft (12x12 m), 110° wide.
- Condition display via LED.
- Adjustable sensitivity.
- Intelligent logic control prevents false alarms.
- Wall mount or hang in a corner.
- Pulse count adjustment.
- Good RFI protection.
- Screw terminal
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m).
- Includes 12V/1A power supply.
- Includes mounting bracket for installing the sensor to a ceiling or wall.
- Compatible with ENVIROMUX-MINI-LXO.
- Regulatory approvals: CE, RoHS.
Infrared Motion Detector - TAA, CE Compliant
- Registers movement in area covered: 40x40 ft (12x12 m), 90° wide.
- Condition display and setting feedback via LEDs.
- Combined Fresnel and cylindrical optics provide enhanced detection and false alarm immunity.
- Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets up to 60 lbs (27 kg).
- Selectable sensitivity profile settings: fast response, highest false alarm protection
- Mounting height: 6 to 8 feet (1.8 to 2.4 meters).
- Includes mounting bracket for installing the sensor to a ceiling or wall.
- Tamper resist feature.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Operating temperature: 14 to 122°F (-10 to 50°C).
- Dimensions WxDxH (in): 1.97x1.45x3.14 (50x37x80 mm).
- Includes 12V/1A power supply.
- Compatible with ENVIROMUX-MINI-LXO.
- TAA compliant.
- Regulatory approvals: CE, RoHS.
Ceiling Mount Motion Detector
- Detects movement across the detection field.
- 360° detection pattern.
- 113° conical detection angle from ceiling.
- Registers movement in area covered: 36 ft (11 m) diameter, 12 ft (3.6 m) from ceiling.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection
- Screw terminal
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- Maximum cable length: 1,000 ft (305 m).
- Includes 12V/1A power supply.
- Compatible with ENVIROMUX-MINI-LXO.
- Regulatory approvals: CE, RoHS
