Environment Monitoring System Gas Detectors
Gas Detection Sensors compatible with ENVIROMUX-1W
Smoke & Carbon Monoxide Detectors/Sensors
Carbon Monoxide Detector
- Continuous air monitoring.
- Pre-set alarm points alert at:
- 70 ppm after 60 to 240 minutes
- 150 ppm after 10 to 50 minutes
- 400 ppm after 4 to 15 minutes
- Flush or surface mount.
- Test functionality of electrochemical CO sensing cell.
- Connect to digital input sensor ports.
- Screw terminal
- To connect to the digital inputs use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- LED indicators for operation status and system test.
- Includes 12V/1A power supply.
- Compatible with ENVIROMUX-1W.
- Regulatory approvals: UL
- Compatible with the ENVIROMUX-DI2-1W Digital Input Expander.
Gas Detector — Methane, Butane, Propane
- Use to detect leaks of combustible gas (methane, propane, butane, acetylene, etc.)
- Choose between two levels of detection:
- First level:
- Detects methane at concentrations in excess of 0.5%.
- Detects propane/iso-butane at concentrations in excess of 0.3%.
- Second level:
- Detects methane at concentrations in excess of 0.8%.
- Detects propane/iso-butane at concentrations in excess of 0.5%.
- Continuous air monitoring.
- Audible alarm signal: 94 dB at 1 foot.
- Relay specifications: level selectable, normally open or normally closed, 250V AC, max 5A.
- Maximum cable length: 1000 ft (305m)
- Includes 12V/1A power supply.
- Compatible with ENVIROMUX-1W.
- Regulatory approvals: CE
- Compatible with the ENVIROMUX-DI2-1W Digital Input Expander.
Hydrogen Gas Detector
- Use to detect leaks of hydrogen gas in battery monitoring/charging rooms, substations, uninterruptible power supplies (UPS), and hydrogen fueled back-up power systems.
- Alarm set point: 10% LEL hydrogen gas.
- SPDT Alarm and normally-closed output relay.
- Self-restoring or latching options.
- Sensor requires no maintenance or recalibration.
- Includes mounting hardware.
- Voltage supply: 12 to 24 VDC or VAC.
- Operating temperature: 32 to 120°F (0 to 49°C).
- Dimensions WxDxH (in): 4.5x5x1.63 (114x127x41 mm).
- Includes 12V/1A power supply.
- Compatible with ENVIROMUX-1W.
- Compatible with the ENVIROMUX-DI2-1W Digital Input Expander.
