RS485/RS232/RS422 to Fiber Converter/Extender

NTI Part #: E-SER-2FOMMSC

Qty:

Environment Monitoring System Sensor Accessories
Sensor accessories compatible with ENVIROMUX® E-2D, E-5D and E-16D

Talk to a live agent

Extends sensor over two singlemode or multimode fiber cables.
- E-SER-2FOMMSC: Using a duplex multimode 50-micron or 62.5-micron SC cable, extend to 1.2 miles (2 km).
Converts RJ45 cabling into fiber on both ends.
- Use CATx cable with one end unterminated to connect the ENVIROMUX unit and sensor to the fiber converters.
- Maximum CATx length is sensor-dependent, but cannot exceed 1,000 ft (305 m) on local and remote ends combined. (See sensor specs for max length.)
Built-in surge and static protection.
Connectors (local/remote unit):

E-SER-2FOMMSC:

Includes two RS485/RS232/RS422 to Fiber Converters, two 12VDC power supplies, and one 5VDC power supply.

Dimensions (WxDxH):

Operating temperature: -40 to 185°F (-40 to 85°C).

Operating humidity: 5 to 95% non-condensing RH.

Compatible with E-2D/5D/16D.

Regulatory approvals: CE, FCC, RoHS.

Temperature

Temperature/Humidity

Liquid/Gas/Air Velocity

Weather & Outdoor

Light/Noise

Power

Accessories

Extend Sensors Up to 1.2 miles Away From E-2D/5D/16D

The E-FSC converts RJ45 cabling into fiber, enabling a sensor to be located up to 1.2 miles (2 km) away from the E-2D/5D/16D unit. Furthermore, between the ENVIROMUX unit and fiber converter, and between the fiber converter and sensor combined, up to 1,000 ft (328 m) of CAT5/5e/6 cable can be used to extend the distance further. Note: by using the Digital I/O Expanders or Temperature/Humidity Sensor with Two Digital Inputs at the remote end, additional sensors can be connected.