Environment Monitoring System Vibration & Glass Break Sensors
Motion / Intrusion / Vibration Sensors compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
Vibration & Glass Break Sensors
Vibration Sensor - Registers Movement & Shocks
ENVIROMUX-VSSB
- For registering movement and shocks - sensed through surface to which it is mounted.
- Trigger duration: 3.1 to 4.1 seconds
- RJ45 connector for connecting to an ENVIROMUX-2D/5D/16D.
- Maximum cable length: 1,000 ft (305 m)
- Voltage Supply: 5VDC
- Current Consumption: 15mA
- Operating temperature: 32 to 104°F (0 to 60°C)
- Storage temperature: -22 to 140°F (-30 to 60°C)
- Relative Humidity: 17 to 90% non-condensing RH.
- Powered by ENVIROMUX-2D/5D/16D.
- Compatible with ENVIROMUX-2D/5D/16D.
- Mounting bracket included.
- Dimensions without bracket WxDxH: 2x2.5x1.28 in (51x64x33 mm)
- Dimensions without bracket WxDxH: 3.75x2.5x1.34 in (95x64x34 mm)
- Regulatory approvals: CE, RoHS
Rugged Vibration Sensor – Detect Over- or Under-Vibration in Machinery
ENVIROMUX-VSSR-10
- For registering over- or under-vibration in machinery such as large motors, gear boxes, turbines, pumps, blowers, crushers, compressors, blenders, hammermils, and conveyors.
- Adjustable over/under alarm sensitivity: 0.1 to 2.2 in/s (2.5 to 55 mm/s) rms.
- Minimum vibration frequency (-3db): 10 Hz.
- Maximum vibration acceleration: ±1.76 oz (±50 g) peak.
- Isolated NPN output is fail-safe.
- Screw terminal.
- 10 ft attached cable.
- To connect to the RJ45 inputs on an ENVIROMUX system, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Cast aluminum enclosure is rated NEMA 4X.
- Includes 24V, 1.5A power supply.
- DIN rail mountable.
- Operating temperature: -40 to 185°F (-40 to 85°C).
- Dimensions WxDxH (in): 3.94x2.56x1.66 (100x65x42 mm).
Fence Vibration Sensor
ENVIROMUX-FENCE1
- Detects when individuals climb over or cut through chain link or wire mesh fences.
- Advanced built-in signal processor prevents false alarms.
- Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
- Two open-collector outputs – alarm and power failure.
- UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
- Rated NEMA 4X and UL94 5V.
- Use individually or chain units with each ranging from 40 to 60 feet away.
- Includes mounting brackets for installing the sensor to fence fabric.
- Screw terminals.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Powered by ENVIROMUX-2D/5D/16D.
- Operating temperature: -4 to 131°F (-20 to 55°C).
- Operating voltage: 9-15V DC.
- Dimensions WxDxH (in): 2.55x4.7x1.6 (65x119x41 mm)
Glass Break Detection Sensor
ENVIROMUX-GBS
- Acoustically detects the cracking of common framed glass types such as plate, tempered, wired and laminate.
- Adjustable sensitivity and digital signal processing for greater detection sensitivity and improved false alarm immunity.
- Includes mounting hardware for wall and ceiling.
- Detection range: 25 feet.
- Reduced by drapes and/or blinds.
- Connect to RJ45 or digital input sensor ports.
- Screw terminal
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Connect to digital input or RJ45 sensor port on an ENVIROMUX system.
- Maximum cable length: 1,000 ft (305 m).
- Powered by ENVIROMUX-2D/5D/16D.