Home »
Environment Monitoring System Motion Detection Sensors

Environment Monitoring System Motion Detection Sensors

Motion/Intrusion Sensors compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D

Motion Detector Sensors

Low-Cost Infrared Motion Sensor – CE Compliant

ENVIROMUX-IMD-LC

Registers movement in area covered: 39x39 ft (12x12 m), 110° wide.
Condition display via LED.
Adjustable sensitivity.
Intelligent logic control prevents false alarms.
Wall mount or hang in a corner.
Pulse count adjustment.
Good RFI protection.
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Current consumption: 18mA @ 12VDC.
Powered by the ENVIROMUX-2D/5D/16D.
Includes mounting bracket for installing the sensor to a ceiling or wall.
Regulatory approvals: CE, RoHS.

Infrared Motion Detector - TAA, CE Compliant

ENVIROMUX-IMD-TAA2

Registers movement in area covered: 40x40 ft (12x12 m), 90° wide.
Condition display and setting feedback via LEDs.
Combined Fresnel and cylindrical optics provide enhanced detection and false alarm immunity.
Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets up to 60 lbs (27 kg).
Selectable sensitivity profile settings: fast response, highest false alarm protection
Mounting height: 6 to 8 feet (1.8 to 2.4 meters).
Includes mounting bracket for installing the sensor to a ceiling or wall.
Tamper resist feature.
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Operating temperature: 14 to 122°F (-10 to 50°C).
Dimensions WxDxH (in): 1.97x1.45x3.14 (50x37x80 mm).
Current consumption: 9mA @ 12VDC.
Powered by ENVIROMUX-2D/5D/16D.
TAA compliant.
Regulatory approvals: CE, RoHS.

Outdoor Infrared Motion Sensor

ENVIROMUX-IMD-O

Outdoor weatherproof - high reliability against water and insects
Double conductive shielding to eliminate false alarms from light sources
Registers movement in the area covered: 40 ft (12 m) x 50 ft (15 m) - 120° wide
LED lights during detection
Selectable detection paterns: Multi-Level (40 zones) or Pet Alley (18 zones)
Unwanted detection areas can be eliminated using the included area masking strips
Selectable Sensitivity: High, Mid and Low
Adjustable to the brightness of surrounding environment with the Day/Night Mode switch
Tamper switch opens when cover is removed
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Operating temperature: -4 to 122°F (-20 to 50°C)
IP54 compliant
Current consumption: 25mA @ 12VDC.
Powered by ENVIROMUX-2D/5D/16D.

High-Mount Outdoor Infrared Motion Sensor

ENVIROMUX-IMD-OHM

High-mount outdoor weatherproof sensor with 94 detection zones.
Unique pyro-element provides multiple pattern detection and accurate discrimination function for spot temperature changes of moving objects.
- Drastically reduces false and missed alarms caused by severe outdoor environmental changes.
- Upper and lower area must be activated to generate an alarm condition.
- Summer night compensation, advanced temperature compensation, and vegetation sway analysis logic.
Ideal detection area setting – adjustable length/spot detection.
Registers movement in area covered: 13/18/30/40 ft and 85° wide.
LED indicators for operation and system status.
Unwanted detection areas can be eliminated using the included area masking seal.
Mounting height: 8.3 to 10 feet.
Tamper switch opens when cover is removed.
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 520 ft (160 m) (22 AWG).
Operating temperature: -4 to 140°F (-20 to 60°C)
IP54 compliant.
Current consumption: 35mA @ 12VDC.
Powered by ENVIROMUX-2D/5D/16D.

Ceiling Mount Motion Detector - CE Compliant

ENVIROMUX-IMD-CM

Detects movement across the detection field.
360° detection pattern.
113° conical detection angle from ceiling.
Registers movement in area covered: 36 ft (11 m) diameter, 12 ft (3.6 m) from ceiling.
Provides substantial immunity to false alarms caused by environmental disturbances.
Pulse count or single shot triggering.
Good RFI protection
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Maximum cable length: 1,000 ft (305 m)
Current consumption: 15mA @ 12VDC
Powered by ENVIROMUX-2D/5D/16D.
Regulatory approvals: CE, RoHS

Adaptive Dual Microwave/PIR Motion Detector

ENVIROMUX-IMDM

Registers movement in area covered: 30x35 ft (9.1x10.6 m)
Dual technology microwave and PIR signal verification – combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination.
Condition display and setting feedback via LEDs.
Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets/animals.
12 sensitivity modes - automatically adjusts to the environment.
Mounting: Wall or corner, 6 to 10 feet (1.8 to 3 meters).
Tamper switch opens when cover is removed.
Screw terminal.
- Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
  - To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
  - To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Operating temperature: 14 to 122°F (-10 to 50°C).
Dimensions WxDxH (in): 2.5x1.9x3.3 (64x48x84 mm).
Current consumption: 35mA @ 12VDC (max)
Powered by ENVIROMUX-2D/5D/16D.
TAA compliant.
Regulatory approvals: cULus

Single Photobeam Detector, Indoor/Outdoor to 50'

ENVIROMUX-PBD-SO50

Single-beam infrared motion sensor sends alert signal when invisible beam is broken.
Sensing range: 3 to 50 feet (1 to 15m)
Light Source: Infrared LED, wavelength 940nm
LED Beam Spread Angle: Approximately ±10°
Built-in AGC control to filter out lighting disturbances.
LED indicator for power, signal strength, and alarm.
NO/NC relay (set by jumper, default is N.C.)
Screw terminal.
Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Operating temperature: -13 to 131°F (-25 to 55°C).
Dimensions WxDxH (in): 1.94x3x1.19 (48x76x30 mm)
Max current consumption:
- Transmitter: 15mA @ 12VDC.
- Receiver: 30mA @ 12VDC.
Powered by the ENVIROMUX-2D/5D/16D.
Includes mounting hardware.
IP65 enclosure.

Dual Photobeam Detector, Indoor to 790', Outdoor to 390'

ENVIROMUX-PBD-DOxxx

Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
Lensed optics reinforce beam strength and provide excellent immunity to false alarms due to rain, snow, mist, etc.
Sensing range:
- ENVIROMUX-PBD-DO90: indoor to 190', outdoor to 90'
- ENVIROMUX-PBD-DO190: indoor to 390', outdoor to 190'
- ENVIROMUX-PBD-DO290: indoor to 590', outdoor to 290'
- ENVIROMUX-PBD-DO390: indoor to 790', outdoor to 390'
Four selectable beam frequencies.
Laser wavelength: 650nm
LED indicator for power, signal strength, and alarm.
NC/NO alarm output.
Screw terminal.
Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
- To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
- To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Operating temperature: -13 to 131°F (-25 to 55°C).
Dimensions WxDxH (in): 2.9x6.8x2.8 (74x173x72 mm)
Max current (Tx and Rx):
- ENVIROMUX-PBD-DO90: 64mA
- ENVIROMUX-PBD-DO190: 70mA
- ENVIROMUX-PBD-DO290: 74mA
- ENVIROMUX-PBD-DO390: 88mA
Powered by the ENVIROMUX-2D/5D/16D.
Includes mounting hardware.
Weatherproof, sunlight-filtering case for indoor and outdoor use.
Anti-frost system so that beam functions even in extreme conditions.
Built-in laser beam alignment system.