Liquid, Water & Chemical Level Float Sensors compatible with ENVIROMUX® E-MINI-LXO and E-MICRO
Liquid Level Float Switches
Plastic Vertical Liquid Level Float Switch
E-LLS-PF

E-LLS-PF
- Vertically mounted float switch - install in the top or bottom of the tank (inside of the tank).
- Magnets within the float actuate a highly reliable and repeatable hermetically sealed reed switch as the float rises and lowers with liquid level.
- Single-pole single-throw (SPST) circuitry.
- Configure for normally open or normally closed circuit connection.
- When installed on top of the tank and used for sensing when liquid rises to a certain level (default setting), the sensor will be "normally closed" and will open when the liquid reaches that level.
- When installed on the bottom of the tank and used for sensing the drop in the liquid level beyond a certain point, the sensor will be "normally open" and will close when the liquid drops to that level.
- To change the default setting to "normally open", simply remove the bottom clip; remove, flip and replace the float; and reinstall the clip.
- Configure for normally open or normally closed circuit connection.
- IP68-rated water and dust protection.
- Max pressure: 72.5 psi (0.5 MPa)
- Float specific gravity: 0.7
- Material:
- Float: PVDT
- Stem: PP
- Cable length: 15.75 in (40 cm)
- Wire gauge: 24 AWG
- Includes two gel-filled butt splice connectors for extending the cable length up to 1,000 feet.
- Connect to digital input on an E-MINI-LXO or E-MICRO.
- Float Diameter: 0.75 in (19 mm)
- Stem length: 2 in (51 mm)
- Operating temperature: -4 to 176°F (-20 to 80°C).
- Electrical rating: AC 220V/1A; DC 24V/0.5A
- Mounting thread: M8x1.25